View plan at https://www.dreamhomesource.com/plan/5515-square-feet-5-bedroom-4-00-bathroom-3-garage-sp108840
Full Specs & Features
Height : 25' 6"
Width : 105'
Basement Unfinished: 160 sq/ft height 10'
First Floor: 2915 sq/ft height 10'
Garage: 1265 sq/ft height 10'
Roof Framing : Combination Truss/Conventional
Roof Type : Composition
Secondary Pitch : 5:12
Framing : Wood - 2x6
Guest Suite
Split Bedrooms
Walk In Closet
Kitchen Island
Kitchenette Wet Bar
Walk In Pantry Cabinet Pantry
Family Room Keeping Room
Great Room Living Room
Hobby Rec Room Game Room
Main Floor Laundry
Media Room
Open Floor Plan
Upstairs Laundry
Vaulted / Cathedral Ceilings
Covered Rear Porch
Grill Deck Sundeck
Outdoor Fireplace
Bedroom 3:
173 sq/ft width 11' 2" x depth 15' 6"
Bedroom 4:
170 sq/ft width 11' x depth 15' 6"
Bedroom 5:
177 sq/ft width 12' x depth 14' 10"
Den:
172 sq/ft width 11' 6" x depth 15'
Family Room:
437 sq/ft width 19' x depth 23'
Game Room:
465 sq/ft width 15' x depth 31'
Garage:
1261 sq/ft width 34' 1" x depth 37'
Great Room:
460 sq/ft width 20' x depth 23'
Guest Bedroom:
170 sq/ft width 11' x depth 15' 6"
Kitchen:
395 sq/ft width 15' 6" x depth 25' 6"
Master Bedroom:
323 sq/ft width 17' x depth 19'
Media Room:
396 sq/ft width 18' x depth 22'
Nook:
172 sq/ft width 11' 6" x depth 15'
Floor Plan - Main Floor
Floor Plan - Lower Floor
View this plan at https://www.dreamhomesource.com/plan/5515-square-feet-5-bedroom-4-00-bathroom-3-garage-sp108840
In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. You may also need a septic design unless your lot is served by a sanitary sewer system. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance.
To find out what documents you should expect with your house plans, see https://www.dreamhomesource.com/help/faq#faq13.
In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. Examples of this would be earthquake-prone areas of California and the Pacific Coast, hurricane risk areas of the Florida, Gulf & Carolina Coasts. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit.
Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping. In addition, plans which are used to construct homes in Nevada are required to be drawn by a licensed Nevada architect.
Note: All sales on house plans are final. No refunds or exchanges can be given once your order has been fulfilled or once we have begun to customize a home plan to your specifications.