View plan at https://www.dreamhomesource.com/plan/6679-square-feet-4-bedroom-4-00-bathroom-3-garage-sp100233
Full Specs & Features
Height : 26' 6"
Width : 128' 9"
First Floor: 5101 sq/ft
Garage: 1399 sq/ft
Roof Framing : Truss
Roof Type : Shingle
Framing : 2"x6"
Walk In Closet
Walk In Pantry Cabinet Pantry
Great Room Living Room
Hobby Rec Room Game Room
Media Room
Storage Area
Wine Cellar
Side Entry Garage
Butler's Pantry:
width 4' x depth 7' 6"
Covered Entry:
width 23' 8" x depth 14'
Dining Area:
width 17' 7" x depth 15' 6"
Foyer:
width 24' x depth 10'
Garage:
1399 sq/ft width 35' x depth 40'
Great Room:
width 29' x depth 31' 4"
Guest Bath 1:
width 7' 5" x depth 12' 2"
Guest Bath 2:
width 5' 6" x depth 9'
Guest Bath 3:
width 5' 6" x depth 9'
Guest Room 1:
width 14' x depth 16' 8"
Guest Room 2:
width 12' 4" x depth 16'
Home Office:
width 15' x depth 14' 4"
Kitchen/Nook:
width 21' 10" x depth 17' 4"
Laundry Room:
width 9' x depth 13' 2"
Master Closet 1:
width 13' x depth 7' 8"
Master Closet 2:
width 15' x depth 7' 8"
Master Bath:
width 12' 4" x depth 18' 8"
Master Suite:
width 19' x depth 22' 8"
Mechanical:
width 12' x depth 10' 2"
Pantry:
width 9' x depth 5' 8"
Porte Cochere:
width 21' x depth 22'
Rec Room:
width 22' 9" x depth 23' 10"
Theater:
width 22' 9" x depth 16'
Utility Room:
width 13' 6" x depth 7' 6"
Wine Cellar:
width 12' x depth 16' 2"
Floor Plan - Lower Floor Plan
Floor Plan - Main Floor Plan
View this plan at https://www.dreamhomesource.com/plan/6679-square-feet-4-bedroom-4-00-bathroom-3-garage-sp100233
In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. You may also need a septic design unless your lot is served by a sanitary sewer system. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance.
To find out what documents you should expect with your house plans, see https://www.dreamhomesource.com/help/faq#faq13.
In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. Examples of this would be earthquake-prone areas of California and the Pacific Coast, hurricane risk areas of the Florida, Gulf & Carolina Coasts. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit.
Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping. In addition, plans which are used to construct homes in Nevada are required to be drawn by a licensed Nevada architect.
Note: All sales on house plans are final. No refunds or exchanges can be given once your order has been fulfilled or once we have begun to customize a home plan to your specifications.